SHOPPING CART
Your Cart is Empty
Spinner
contact-phone
CALL CENTER
+44 2071 93 13 05

ScanGauge D

Vehicle Monitor for Diesel Pusher Motorhomes and Big Rigs

Linear Logic
Supplier : Linear Logic
Part Number : sgd
Barcode : 788006006119
Availability : In Stock

Unlike gas powered vehicle, OBDII is not the standard for large diesel powered vehicles such as diesel pusher RVs and over-the-road long-haul trucks – these type of vehicle rely on the J1939 and J1708 protocols. Vehicle diagnostic tools for these vehicle are both cumbersome and expensive. The new ScanGaugeD will change all that.

15.DHL

Next Shipment in:

00
HOURS
:
59
MINUTES
* Order now your parcel will leave our warehouse in less than 1 HOURS * Trace your package anytime via tracking number that we will send you via SMS and email

product details

Scangauge Diesel Pusher RV

J1939 & J1708 Vehicle Monitor*

 

Affordable Compatibility in a Compact Design

Scangauge Diesel

Unlike gas powered vehicle, OBDII is not the standard for large diesel powered vehicles such as diesel pusher RVs and over-the-road long-haul trucks – these type of vehicle rely on the J1939 and J1708 protocols. Vehicle diagnostic tools for these vehicle are both cumbersome and expensive. The new ScanGaugeD will change all that.

 

Specialized Cable

Scangauge Diesel Specialized connector cableScangauge Diesel Specialized connector cable

The ScanGaugeD comes with a unique dual connector cable designed to accommodate both the J1939 protocol with a 9-pin diagnostic port as well as the J1708 protocol with 6-pin diagnostic port.

 

Monitor The Most Vital Systems

Scangauge Diesel monitor

With the ScanGaugeD, you can monitor the most vital systems of your large diesel powered vehicle and provide the kind of real time information you've been missing. Features include more than 15 built-in digital gauges, 5 Trip Computers and an easy-to-use ScanTool that shows trouble codes — all in a compact design that installs in minutes.

 
Scangauge Diesel monitor
  • Check & Clear Trouble Codes
  • Built-in Fuel-Saving Features
  • Multiple Trip Computers
  • Built-in & Programmable Digital Gauges
  • Performance Monitor
 

Exclusive Programmable Gauge System

The ScanGaugeD features the exclusiveX-GAUGE™programmable gauge system; you can monitor parameters such as transmission oil temperatures, trip data and fuel economy information. X-Gauge™ gives you the ability to customize your ScanGaugeD by adding additional vehicle specific digital gauges.

Scangauge Diesel monitor
 

Performance Monitor

The ScanGaugeD features the Performance Monitor™ for real-time performance measurements. The Performance Monitor gives your the ability to track your vehicles performance over short periods of time, distance and acceleration.

Scangauge Diesel
 
Scangauge Diesel Μέτρηση

Measure the performance of your vehicle over short periods of time, distance and acceleration.

The Performance Monitor™ allows you to measure and record performance data. You can designate a specific digital gauge to record as well as save and recall the data of up to 8 performance runs for later review and comparison. Performance Monitor lets you step through performance run data by key increments of time, speed and distance giving you a clear picture of your vehicle's performance.

  • Record Speed & Distance in both English and Metric at key points of 60ft, 1/16, 1/8, 1/4-mile as well as at 100ft increments
  • Determine your vehicle's 0-60 time
  • Measure your vehicle's braking performance
  • Save & recall performance runs
  • Monitor specific Digital Gauges
  • And More!
 

* Compatible with 12 volt vehicles only

Scangauge Diesel Οθόνη Παρακολούθησης της Απόδοσης
 

Built in Digital Gauges

The ScanGaugeD features an extensive array of built-in digital gauges that are updated in real time, as you drive. The ScanGaugeD can display up to 4 digital gauges at a time. Using the button next to each gauge position, you can quickly cycle through the available gauges to create your own custom gauge set. You can also change the units of measure between standard and metric, as well as adjust the update rate.

 
Digital GaugeNameDescription
BST Boost Engine boost in PSI, KPA, MM, or IN if desired.
MPG
KPG
MPL
LHK
KPL
Miles Per Gallon
Kilometeres Per Gallon
Miles Per Liter
Liters Per 100Km
Kilomteres Per Liter
Instant fuel economy is updated about every 2 seconds at the NORMAL update rate . Small changes in throttle position or load while driving will show almost immediate changes in this gauge.
MPH
KPH
Miles Per Hour
Kilometers Per Hour
Speed in the units selected
RPM Revolutions Per Minute The RPM of the engine
TPS Throttle Position Sensor In some vehicles, a closed throttle will read 0 and full throttle will read 100. Other vehicles will have a higher value than 0 for a closed throttle and a full throttle value less than 100.
FWT
CWT
Water Temperature Water/Coolant temperature
A vehicle with a 50/50 mix of coolant and water will not boil over until about 265° F at sea level. This will be reduced at higher elevations.
AVG Average Fuel Economy This is the current average fuel economy and is updated about every 2 seconds (normal rate).
TFC Trip Fuel Cost This is the total fuel cost for the current trip.
CPM Cost Per Mile Cost of fuel per mile at this time.
VLT Battery Voltage Normal running battery voltage is between 13 and 15. When the engine is off it should be between 11 and 13. Voltages higher than 15 volts can damage batteries and electrical components. Voltages below 13 when the vehicle is running could indicate poor charging of the battery. Voltage below 11 when the engine is off could indicate a low battery charge or a shorted battery cell.
FIA
CIA
Intake Air Temperature Temperature of the air going into the engine. At highway speeds, this will typically be a few degrees higher than the outside air temperature. At idle or low speed, it may be much higher in temperature than the outside temperature due to the low airflow into the engine and the high under-hood temperatures warming it up.
TFT Transmission Fluid Temperature Transmission Fluid Temperature in degrees Fahrenheit.
GPH
LPH
Gallons Per Hour
Liters Per Hour
Fuel consumption rate in the selected units. This is sensitive to throttle, gear and loading changes.
OIL Oil Pressure This indicates the engine oil pressure in unit PSI/IN/KPA/MM as selected by the user.
LOD Engine Loading This is a percentage of the maximum power available currently being generated. In some vehicles it is the maximum available at the present RPM.
 
 
Scangauge Diesel Track & Diagnose
 

Built In Scan Tool

Troubleshoot Your Vehicle

Modern vehicles are computer controlled, and it often takes a computer to get the information needed to repair them. ScanGaugeD™ will warn you the moment a trouble code is detected. You can also manually scan for Active, Inactive and Pending Trouble codes. ScanGauge then allows you to view the details of the code, the conditions that where present when trouble was detected and clear them.

  • Warns you when a DTC (Diagnostic Trouble Code) is detected.
  • Reads Active, Inactive and Pending DTCs.
  • Shows the conditions when trouble was detected (RPM, Coolant Temp, etc.).
  • Clears trouble codes.

Built in Trip Computers

5 Sets of Trip Data Stored

Multiple automatic Trip Computers keep track of everything from fuel cost, to distance traveled, and everything in between.

Automatically tracks 5 sets of trip data including Current Trip, Today's Trip/Trip A, Previous Day's Trip/Trip B, Current Tank Trip and Tank to Empty. Each computer stores up to as many as 9 individual parameters.

Time and Distance Trip Computers Measure

  • MPG
  • Fuel Used
  • Max Coolant Temperature
  • Miles Driven
  • Max RPM
  • Hours Driven
  • Max MPH
  • Average MPH
  • Fuel Cost

Fuel & Tank Trip Computers Measure

  • MPG for current tank
  • Tank to Empty
  • Distance Driven
  • Distance Until Empty
  • Hours driven on current tank
  • Hours to Empty
  • Average Speed
  • Fuel Used Cost
 
LLU_Compare ScanGaugeII_compare1 ScanGaugeE_compare1 ScanGaugeD_compare1
  ScanGauge II ScanGauge E ScanGauge D
OBDII Interface DRF_Comparison_Check DRF_Comparison_Check  
J1939 & J1708
Interface
    DRF_Comparison_Check
Scan Tool Functions DRF_Comparison_Check DRF_Comparison_Check DRF_Comparison_Check
Built in Digital Gauges DRF_Comparison_Check DRF_Comparison_Check DRF_Comparison_Check
Built-in Trip Computers DRF_Comparison_Check DRF_Comparison_Check DRF_Comparison_Check
Color Backlite Display DRF_Comparison_Check DRF_Comparison_Check DRF_Comparison_Check
English & Metric read
outs
DRF_Comparison_Check DRF_Comparison_Check DRF_Comparison_Check
Performance Features DRF_Comparison_Check   DRF_Comparison_Check
X-Gauge Feature DRF_Comparison_Check   DRF_Comparison_Check
User Programmable
Commands
DRF_Comparison_Check   DRF_Comparison_Check
MPG Graph Display   DRF_Comparison_Check  
Computes Horsepower
in real-time
DRF_Comparison_Check   DRF_Comparison_Check
Computes CO2 emitted
by vehicle
  DRF_Comparison_Check  
Overall Dimensions Height: 1.5in (38.1mm)
Width: 4.8in (121.92mm)
Depth: 1.0in (25.4mm)
Height: 1.4in (35.56mm)
Width: 3.6in (91.44mm)
Depth: 1.0in (25.4mm)
Height: 1.5in (38.1mm)
Width: 4.8in (121.92mm)
Depth: 1.0in (25.4mm)
 

products downloads

related products

CONTACT US
+44 2071 93 13 05
Call Center
TPL Contact Email
Email Message
WORKING HOURS
Monday - Friday 9:00 - 20:00
Saturday - Sunday Closed
W3C HTML5 validator