Air Intake Temperature Sensor Module
- AIT main unit
- 1,2m (4ft) power wire with 2.1mm connector
- 1,2m (4ft) Analog wires and connector with 4 terminals
- 32cm (1ft) Serial Cable
- Termination jumper
- K-Type Thermocouple (sold separately)
The PLX Air Intake Temperature Sensor Module accurately measures the air intake temperature of any intake manifold. This is ideal for intercooler, or aftercooler applications. Any K-Type thermocouple is compatible. Up to 32 Sensor Modules can be daisy chained together in the PLX iMFD system. The Air Intake Temperature Sensor Module can also be used as a stand alone unit capable of interfacing with 3rd party hardware.
||2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
||~5 Deg C (~9 Deg F)
||0-1023 Deg C (32-1873 Deg F)
||Linear 0-5V (Driving Current 20mA)
||0 - 85 Deg C
||One K-Type Thermocouple
0-5V analog linear output
DM-6 Touch Screen Multi Gauge The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.
||Standard 2 1/16 x 0.7" (52 X 18 mm)
||1.10" OLED Screen (124 x 36 pixels)
LED (16 Green, Yellow, Red)
||3.3V and 8V from SM Module
||< 1 Watt
||6' Power, 6" Serial
||0 - 85 Degrees Celsius
||3 Button Capacitive Touch
|Number of Sensors:
||16 Maximum Daisy Chain
||US Standard, Metric
> DM-6 2 1/16" (52 mm) Gauge
> 4 Pin connector for SM-AFR connectivity
> 2 Terminals for 4 pin Connector
> 3.5 mm Y Splitter
> 6" M/F Extension Serial Cable
iMFD Stands for intelligent multi-functional display. It is the PLX standard for connecting everything in a daisy-chain.
Any product labeled with are fully compatible with each other.
Sensor Modules (SM)
Up to 32 sensor modules can be connected in any combination
To Display Modules or Data Logger
Display Modules (DM)
Up to 32 display modules can be connected in any combination
From Sensor Modules or Data Logger Output
The simple setup connects to just one SM module. This is great for stand alone gauges.Looking at the above diagram.
PLX Display Modules are also compatible with the PLX iMFD serial stream.
Two Options for datalogging are available. iMFD Data Logger and the iMFD Serial USB Adapter.
|iMFD Data Logger
||iMFD Serial to USB Adapter
|From Sensor Modules
||To Display Module
||From Sensor Modules
||To Display Modules
|USB to PC High Speed download from flash Real-time
||USB to PC Real-time only